Osmo Polyx-Oil Tints - Satin
- Protects and colours with wood grain visible
- Harmonious appearance
- Resistant to common liquid spillages such as water, juice, tea, cola and wine
- Saliva-resistant and sweat proof, suitable for children’s toys
- Microporous, breathable finish which does not crack, peel or flake
- No sanding necessary for spot repairs or future applications
Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.
All the renowned properties of the original Polyx®-Oil, tinted for individual creativity. Polyx®-Oil Tints - Satin is water-repellent, dirt-resistant and durable. The surface is pleasant to touch, has an even and harmonic optic and is based on natural, renewable raw vegetable materials.
Free shipping with same day despatch.
On orders placed Monday to Friday before 3:30pm - orders placed outside these times will be shipped the next working day.
RECOMMENDED
For all other wood types not mentioned, always trial apply first.
- Oak
- Pine
- Spruce
- Beech
- Ash
- Alder
- Douglas Fir
- Birch
- Larch
ALSO RECOMMENDED
For the following wood types, WR Base Coat is recommended before use.
- Accoya®
- Kebony®
- Pine
- Spruce
NOT RECOMMENDED
The wood species below are not recommended for Polyx-Oil Original. Please use Osmo Wood Wax Finish Extra Thin instead.
- Cedar
- Iroko
- Mahogany
- Teak
- South American Walnut
- Sapele
- Bamboo
- Acacia
- Ipe
- Merbau
- Ebony
- Wenge
- Ipe
- Sycamore
- Rosewood
ALSO NOT RECOMMENDED
- Green Oak: moisture content is often above the maximum 20% recommended.
- Idigbo: contains yellow dyes which leaches when the wood becomes wet and stains when in contact within iron.
- Other woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use.
SURFACE PREPARATION
Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Polyx®-Oil Tints is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Fill small cracks, larger joints or holes in wood (Osmo Wood Filler).
Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHOD OF APPLICATION
Transparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
Allow to dry for approx. 24 hours under good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal two coats).
Lightly stained effect: Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours under good ventilation.
Intensive colour: For this application, we recommend Osmo Wood Wax Finish or Osmo Oil Stain.
Important: Apply maximum one coat of Polyx®-Oil Tints or Oil Stain to flooring.
(Not applicable for Polyx®-Oil Tints 3040 White, see Notes.) After thoroughly drying, a top coat with a clear Osmo Polyx®-Oil is to be carried out. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
TOP TIPS
- Stir well using a flat stirring stick or spatula before use. Failure to mix the colour and all ingredients could lead to an increased patchiness.
- For dark or exotic wood species, use Osmo Wood Wax Finish Clear Extra Thin.
- Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
- Two coats can be applied on wooden furniture, doors and joinery, but only one coat is recommended on wooden flooring – a clear top coat of Osmo Polyx®-Oil is required (approx. 24hrs after the first coat).
- 3040 White is recommended to be used as a stand-alone finish without a top coat of clear Polyx-Oil. Alternatively 3040 can be used as a top coat after application of Osmo Wood Wax Finish 3111 White, to preserve the desired intensity of white and reduce the effects of yellowing.
- For a wider choice of colour tones, or if a more intense colour tone is desired see Osmo Wood Wax Finish.
- A base coat of Osmo Wood Protector 4006 is recommended for use in bathrooms or kitchens. Please be aware that Osmo Wood Protector 4006 may darken the wood very slightly.A trial application is highly recommended.
- Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
- Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.
- Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.
- Be cautious if applying 3062 Clear Matt over a dark coloured surface such as 3075 Black. The matting agents within 3062 may produce a white mist or powdery effect upon the surface. It is recommended to apply 3065 Semi-Matt if a sheen is not desired. Always trial apply!
ADDITIONAL INFORMATION
- Approx. coverage: 30m²/L with one coat
- No. of coats: 1 + Polyx®-Oil
- Application temperature: +5°C
- Drying time: 24 hrs.
- Sizes: 0.125L, 0.750L, 2.5L
Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.
All the renowned properties of the original Polyx®-Oil, tinted for individual creativity. Polyx®-Oil Tints are water-repellent, dirt-resistant and durable. The surface is pleasant to touch, has an even and harmonic optic and is based on natural, renewable raw vegetable materials.