METHOD OF APPLICATION
With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
If applying the Door-Oil 3033 Raw, remove excess white pigment before allowing the surface to dry. Allow for good ventilation while drying. After drying, apply a second coat – also thinly.
CARE
Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner.
Occasional Maintenance: For the Intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door Oil 3060 clear satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw matt as it will appear more shiny.
Recoating: Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.
TOP TIPS
- For solid doors with reddish, exotic or otherwise ingredient-rich wood species, use Osmo Wood Wax Finish Clear Extra Thin. For Veneered doors with reddish, exotic types of timber, always contact the door manufacturer for further guidance on finishing.
- Always shake the can well before use. Failure to mix the white colour (within Osmo Door-Oil 3033 Raw) and all ingredients could lead to an increased patchiness.
- If Osmo Door-Oil 3033 Raw becomes excessively applied, or if the surface has been sanded to a very fine grade of sandpaper – the inherent white pigments can show visibly in some areas. For solid doors, the remedy is to carefully sand the surface back then finish to the same sanding grade or texture as surrounding areas. Apply the Osmo Door-Oil 3033 Raw very thinly along the grain and spread well. For veneered type doors, always check with the manufacturer that sanding is possible then proceed accordingly. Always trial apply first.
ADDITIONAL INFORMATION
Untreated wood in its original form has a light, pale character from its natural ‘raw’ appearance. Sanded wood also has the same effect.
Osmo Door-Oil Raw Matt 3033 is designed to retain this appearance by using a small amount of white pigments to neutralise the permanent ‘wet-look’ that develops after application of a clear finish.
Apply very thinly and brush out any white pigments from the surface before leaving to dry to achieve the desired results.
The wood’s true beauty is accomplished by using Osmo Door-Oil Clear Satin, 3060. The emphasis on the wood’s grain and natural characteristics provides a warm and rich effect to ensure that any interior looks luxurious and elegant.